|
LT100 Series
Lightning & Thunder Application Notes
This module is so easy to
use!!
Suggestions:
We would suggest you use at least a 4 inch speaker, or larger
For power you can use a 9 or 12 volt DC wall mount transformer.
Switches and speaker will require
some soldering.
Timer only operation
Timer will activate the lightning and
thunder.
Timer adj. full counter clockwise will repeat the scenario approx. every
50 seconds.
Timer adj. full clockwise will repeat the scenario approx. every 3
minutes.
|
Timer with pushbutton
& or track sensor operation
This configuration will operate with the
timer, and also with the pushbutton on demand
or magnetic switch when the train passes over it and activates the
scenario.
|
Timer disabled --
Pushbutton & or track sensor operation
This configuration will disable the timer, and
only operate with the pushbutton on demand
or magnetic switch when the train passes over it and activates the
scenario.
|
|
