|
Innovative Train
Technology Co.
P.O. Box 5042 West Hills, CA 91308
(818)926-1143
Email: george@ittproducts.com
 
Frequently Asked Questions
HQ Sound Modules
| Question: |
Does each module
require its own speaker? |
| Answer: |
Yes, each module requires its own
speaker. |
| Question: |
Can I use more then one speaker on
a module? |
| Answer: |
Generally, 1 module,
1 speaker. The amplifier can drive 1 8
Ohm Speaker of any size. However there is an exception
if you put 2 speakers in series, then you can use
2, but this reduces the power through each speaker. |
| Question: |
What voltage is required to power
the HQ sound modules? |
| Answer: |
You can use 9 to 18 volts AC or DC
from any source you have, or purchase our TR-1 power
adapter . |
| Question: |
How long does each module play
for? |
| Answer: |
Each module will
play for up to 30 seconds depending on the scenario
recorded on it.
However it can play 1 time, or continuous
looping. |
| Question: |
Can these modules
be used onboard trains? |
| Answer: |
Onboard usage is limited. These modules are great for
cattle cars and other repetitive sounds. For onboard
usage sounds are best suited with DCC usage where track
voltage can be use to power the HQ modules and your
spare function decoder output can be used to activate
the sound. |
LT100 Lightning and
Thunder
| Question: |
Does each module
require its own speaker? |
| Answer: |
Yes, each module requires its own
speaker. |
| Question: |
Can I use more then one speaker on
a module? |
| Answer: |
1 module,
1 speaker. The amplifier can drive 1 8
Ohm Speaker, and we suggest at least a 4 inch. |
| Question: |
What voltage is required to power
the LT100 lightning and thunder? |
| Answer: |
You can use 9 to 12 volts
filtered DC
such as a wall mount DC adapter. Do not use the
accessory DC terminals on a train controller because it
is not filtered DC. When in doubt, you should purchase
our TR1 transformer |
| Question: |
How long does each module play
for? |
| Answer: |
Each module
plays for up to 30 seconds depending on the scenario
recorded on it. |
| Question: |
Can I add more
LED's? |
| Answer: |
This
unit is designed to use the one LED as it is on the
board. You can place the board wherever you required the
desired effect. |
|